Delphis Eco Multi Purpose Descaler Eco Friendly Plant Based Free from Hydrochloric Acid, Enzymes, Formaldehyde, VOCs and APEs– Delphis Eco UK
  • Phosphate-free
  • 100% recycled bottles
  • Plant-based power

Multi Purpose Descaler 350ml

£4.00
Immediate delivery
Get it today
Check your postcode
Benefits

Our Multi-Purpose Descaler eliminates limescale and water marks from surfaces and restores appliances including kettles, irons, washing machines, and coffee makers. It can also be used as a soaking shower head descaler. 

Our formula is plant-based, vegan-friendly and highly effective. It uses non-toxic natural acids to work fast to dissolve limescale in your kitchen and bathroom. It improves the efficacy of appliances and leaves surfaces dazzling, completely free from limescale build-up.

  • Fast & effective formula
  • Non-toxic & safer to use
  • Free from Chlorine bleaches, Formaldehyde, Phosphoric Acid, Hydrochloric Acid, Fragrances, and contains low VOC’s
  • Safe in septic tanks if used as directed
  • Readily biodegradable
  • Phosphate and phosphonate-free
Usage

Use regularly to prevent limescale build-up.

Instructions for Use 

This product is a concentrate and must be diluted as per instructions.

  • Kettle: Ratio 1:10 with water. Fill kettle with fresh water and boil, add 1:10 ratio of descaler liquid and leave for several minutes. Rinse thoroughly until foam has disappeared. Repeat if required.
  • Iron: Dilute 125ml Multi-Purpose Descaler with 350ml warm water. Add to iron tank and select “STEAM” – press button to draw descaler steam through iron steamer and leave for a few minutes. Disconnect iron and empty tank completely, rinse out a few times. Add fresh water, connect iron and select “STEAM” – press button to draw fresh water through the iron steamer.
  • Shower Head: remove your shower head if possible, otherwise you can tie a plastic bag around it (just ensure the shower head will be completely covered in solution). Mix ratio 1:4 warm water and leave to soak for 30 mins. Rinse thoroughly.
  • Washing Machine: Add 100-250ml descaler liquid to the detergent dispenser, set to the correct cycle and let it run empty (without clothes). Run
    again afterwards empty with regular detergent.
  • Coffee Machine: Mix 1 part of the descaling solution (80ml) to 8 parts water and add to the reservoir of the coffee maker. Switch the machine once and run through as normal, including the steamer. Empty the machine and repeat the process twice more with clean water. 

WARNING: Please always check the cleaning instructions of your appliance (specifically coffee and washing machines) before using a descaler product, ensure using our product is in line with
manufacturers’ guidance on items being cleaned. Your appliance warranty may be void if you use the wrong descaler product.

Avoid use on acid-sensitive surfaces such as aluminium, gold, silver or copper, or damaged
surfaces. DO NOT USE on natural stone such as marble. 

For product guides, information sheets and safety data sheets please send us an email.

Areas of Use

  • Kettles
  • Shower heads
  • Boilers
  • Washing Machines
  • Coffee Machines
  • Irons 

Customer Reviews

Based on 1 review
    Bio Ingredients Icon  Septic Tank Safe Icon  Phosphate Free Icon  Pet Safe Icon  100% recycled bottles icon
    WHICH LIMESCALE PRODUCT DO I NEED?

    WHICH LIMESCALE PRODUCT DO I NEED?

    We've got a few options depending on which area of your home you'd like to treat, click below to find out more about our Limescale Products.

    LEARN MORE

    THE DELPHIS DIFFERENCE

    Frequently asked questions

    What is limescale?

    Limescale is a hard white substance mainly made up of calcium and magnesium which is left behind
    when hard water evaporates. “Hard water” is produced when water travels through chalky limestone lands and picks up lime along the way. Geologically, there is a lot of limestone in the south
    of the UK, especially around the North and South Downs. But, as water is transported all over the country, it can travel to places that historically do
    not have hard water, so it’s important to be able to identify limescale in your home and treat it before it becomes a problem.

    How do I know if I live in a “hard water” area?

    Around 60% of the UK is classed as having hard or very hard water, with many areas exhibiting over 200mg of calcium carbonate per litre from a “soft water” baseline of 60mg per litre. If you check out our map of the UK above, you can see if the area you live in has hard water.

    How does limescale appear?

    There are two primary ways limescale forms:

    1. EVAPORATION: Water evaporates leaving the scale-forming minerals behind on surfaces, these then bond to the surfaces and stay there, leaving behind hard white deposits. This is often found on taps, plug holes, shower heads and glass.

    2. HEAT: When water is heated, the minerals within the water will rapidly begin to form scale (hard white pieces which float around), which is why limescale commonly builds up quickly in hot appliances like kettles and irons.

    How do I know if I have limescale?

    The most obvious signs of limescale are:

    • What limescale looks like on taps: hard white deposits around your taps, plugholes and sinks.
    • What limescale looks like on showers: Your shower pressure might be down, and
      there will be build-up around the nozzles on the showerhead. The shower glass
      may also become cloudy.
    • What limescale looks like in a kettle: you might get bits of limescale in your tea
      and see them floating in the kettle, particularly around the heating mechanism
      which may cause it to stop working as efficiently.
    • What limescale looks like in an iron: it might be struggling to heat up and leave
      white flakes on your clothes.
    • What limescale looks like in a coffee machine: Your steam nozzle may become clogged and the machine may stop working properly
    • What limescale looks like in a washing machine: clothes coming out of the washing machine smell bad, and the actual drum may also begin to smell.
    • What limescale looks like in a toilet: faecal particles stick to limescale in the toilet bowl, causing the limescale to look like a brown stain underneath the waterline.

    If you’re looking to remove limescale on vertical surfaces or in your bathroom, use our Limescale Remover. In your toilet, use our Toilet & Limescale Cleaner. However, if you’re looking to descale any appliances, use our Multi-Purpose Descaler.

    Why is limescale bad?

    Limescale is not dangerous to ingest if you’re only just beginning to notice it in your cup of tea. But, over time limescale build-up can become a breeding ground for bacteria and has been associated with legionaries disease. It can also ruin your treasured appliances.

    What does limescale do to your appliances?

    We might be familiar with the unsightly look of limescale on our kitchen appliances but what’s going on beneath the surface?

    • Reduced Heating Efficiency: Limescale build-up on the heating element in your kettle or coffee makers, irons and washing machines will pump the brakes on your morning routine. It directly impacts the temperature, making it take forever to heat water. Time is precious - don't waste it waiting for your cuppa!
    • Increased Energy Consumption: More time to heat up equals more energy consumed. Limescale not only slows down the process but also makes your appliances work harder, resulting in higher energy bills.
    • Corrosion and Breakage: Limescale isn't just a nuisance; but can impact your appliance's lifespan. Over time, the relentless build-up can lead to corrosion of the heating elements, eventually causing them to break permanently.

    So, it’s important to tackle a limescale problem as soon as you notice it.

    How does Multi-Purpose Descaler work?

    We’re about to get a bit GCSE science-y, but if you’re interested it’s quite cool to know. Basically, solid limescale has a high pH, it’s alkaline – you need to lower the pH to neutralise the limescale using an acid. The acid level brings the overall pH of the limescale down and when limescale is at a lower pH it’s more soluble (it becomes liquid
    again). So, the acid in the Multi-Purpose Descaler dissolves the limescale, making the limescale liquid again and so it can wash down the drain. Our Multi-Purpose Descaler has a pH of 2. Pretty cool, eh?

    Why is it better to use eco-friendly limescale?

    A lot of conventional descalers use toxic acids (like hydrochloric acid or phosphoric acid), which are not only dangerous for us but also for aquatic life. Our Multi-Purpose Descaler uses citric and formic acid (both plant-derived), and responsibly sourced
    plant-based cleaning agents. So, our product is safer for you to use, and safer
    for the planet once it goes down the drain.

    Back to top